Skip to main content

Safety measures while dealing with Underground cables



This blog focuses on approach while dealing with underground cables, which is often overlooked. It can be harmful and hazardous if not dealt right.
One of the main dangers which may arise when digging is that of possible injury from underground power cables. Injuries resulting from damage to live power cables are usually caused by the explosive effects of arcing current and by associated fire or flames. This can occur when the sheath of the cable and the conductor insulation are penetrated by a sharp object, such as the point of a tool, or when the cable is crushed severely enough to cause contact between the sheathing and one or more conductors.
This typically causes severe and potentially fatal burns to the hands, face and body.
Direct electric shock is also a possibility. Furthermore, some high voltage power cables are oil filled and oil can ignite. Electrical fires can be catastrophic if damage spreads to other nearby services such as gas pipes. Such accidents are caused by failure to take all reasonably practicable precautions to prevent accidental contact with underground services.
Recommended methods and procedures, which, if adopted, will provide a positive approach to the elimination of these tragedies.

The basic elements of a safe system of work involve:

1.    Correct use of Plans (to aid location of power cables)

Before starting work it is essential that you have all of the cable records for the location and that these are kept on site at all times while work is proceeding. Make sure that they are up-to-date; that they cover all cable voltages at the location; that you understand how to interpret them; and that they are fully utilised both in advance of commencing digging and throughout the full duration of the work.

2. Use of Cable Locating Devices

Suitable cable locating devices should be used in conjunction with the cable plans to determine as accurately as possible the position of underground cables in or near the proposed work area.

3. Use of Safe Digging Practice

These three key elements complement each other and all three should be used when working near buried services.
LAPP, one of the leading cablemanufacturers in India, provides cable based on the application. Therefore, you will find wide range of the cables, these cables are tested under extreme circumstances. Therefore, you can rely on the quality and be sure that you would be safe. Do visit the official website of LAPP to check the available options of the cables.




Labels:

Comments

Post a Comment

Popular posts from this blog

Common Fiber Optic Cables Problems

As Clint Eastwood quoted, “ Aging can be fun if you lay back and enjoy it .” However this quote does not apply to the fiber optic cables or any cable in general. Some fiber optic networks have now been in use for more than 20 years, a tribute to the inherent capabilities of optical fiber. In that same time, copper cabling for premises networks has been through two generations of coax and at least four generations of unshielded twisted pair cabling. Why do the Old Fiber Optic Cables still Works so Well? ·          One reason is the extreme care that went into its design. Telephone cable engineers already knew how to make cable that would survive for long times buried underground or suspended from poles. Adapting that technology to glass fibers , while adding plastics to protect the fiber from the environment by hermetically sealing the glass, and using the then new technology of aramid fibers to prevent stress on the glass i...
Post a Comment
Read more

Basics of Cables and Connectors

If we check the history of electric cables, the real demand for wires and Cables to conduct electric power began in 1871, with the invention of the first dependable dynamo. The telegraph and telephone swelled demand for efficient methods of transmitting electric current and signals over long distances. The insulation back in the days was paper coated. Just imagine Paper-coated pitch wrapped each individual wire, insulating it from the others. The whole batch was then wrapped in paper. Some even suggested laying these batches in tubes coated in resin and placing them underground to keep curious young boys away from them. In the case of cables, factors like resistance, capacitance and impedance all play a role. There's also a great many more electrical sources , magnetic sources and broadcast radio frequencies today than there were in the days of paper and pitch insulation. All of these factors can affect a cable's transmission. As a result, shielding is another impo...
Post a Comment
Read more

Life Expectancy of your Control Cable India and what should you expect?

With the talk of life expectancy being the need of the hour, I want to start this blog with a quote from the American author and computer scientist, Ray Kurzweil: “ Life expectancy is a statistical phenomenon. You could still be hit by the proverbial bus tomorrow .” One of the important question to ponder, when constructing new builds or considering refurbishment is: What is the life expectancy of the control cables in use? To be frank, there are no minimum requirements for an expected lifetime in cable standards and specifications. And the majority of high-quality cable manufacturers always deliver the probably expected lifespan. Under ideal circumstances which means considerably reduced heating and lower loadings, we can find the examples of cables that have remained in safe use for over 50 years. The parameters influencing the life expectancy of the control cable India ·           The changes in the polymer...
Post a Comment
Read more